New Balance MT100-WT100 Review

A video and text review of the New Balance MT100/WT100, a low-profile trail running shoe.

By on May 17, 2010 | Comments

Our Favorite Trail Running Shoes

To learn about our current favorite trail running shoes, check out our Best Trail Running Shoes article.

New Balance MT100-WT100 Review

Over the past year, New Balance’s MT100 (men’s) and WT100 (women’s) have gathered quite a following among fans of minimalist trail shoes. Designed with the help of Anton Krupicka and the Skaggs brothers, there aren’t a lot of extras on these shoes. Watch the following video for a closer look at this lightweight, trail-worthy shoe. As with future video reviews on iRunFar, you can also skip ahead to written summary of the video review.

[Editor’s Note: We’re afraid this video has been lost to the ether.]

[This is the first of what we hope will be many Trail Trials with Travis Liles video reviews here on iRunFar. He’s previously produced great video reviews on FlatlandUltra.com and, more recently, at his website, RunTheUltras.com. We’re excited that he’s joined the iRunFar family.

You can now subscribe to all of iRunFar’s video content via iTunes or via RSS for non-iTunes users. You can also subscribe to audio-only versions of iRunFar’s podcasts via RSS.]

New Balance MT100/WT100 Review
The New Balance MT100/WT100 (hereinafter MT100 for simplicity’s sake) is an evolution of the New Balance 790. It’s a marquee shoe in the current set of low profile trail shoes. A men’s size 9 tips the scale at a mere 7 ounces and change. Be aware that you’re wallet will weigh more than after buying most other trail shoes as the MSRP is a mere $75. For the over eager, iRunFar has previously shared a sneak peak at the MT101/WT101 due out late in 2010. Below, we’ll look at the shoe’s outsole, midsole, and upper.

Outsole
The MT100’s outsole is trail specific, but is suitable for some road running. The shoe is particular adept on packed dirt. It is not the shoe of choice for sloppy mud.

New Balance MT100 outsole

The New Balance MT100’s lightweight, trail-worthy outsole.

The foremost half of the outsole features lugs a few millimeters thick. Minimally textured rubber stretches from the arch back to the heel, which is home to the shoe’s most significant lugs for braking. The outsole features circular cutouts that reduce weight.

Midsole
The MT100 has a single density midsole, meaning that the shoe does not have a post for pronation control. On the other hand, the midsole is raised on both the inside and outside of the midfoot. This results in a fair amount of support for the shoe’s weight.

New Balance MT100 midsole

The New Balance MT100’s surprisingly supportive midsole.

The Rock Stop rockplate sandwiched between the outsole and midsole offers decent push-through protection in the forefoot and midfoot. The TPU plate does, however, mean that the shoe is a bit stiffer in the forefoot than some comparable models and creates a pivot point at the rear of the rockplate.

Upper
The upper is primarily mesh backed by lightweight fabric and has minimal overlays. These combine to provide a sock like feel that gives the foot room to wiggle around. However, the upper also does not offer much lateral support, which can be problematic on technical or switchbacking trail. The highly breathable fabric allows water to quickly drain from the shoe.

New Balance MT100 upper

The New Balance MT100’s highly flexible upper.

The ankle collar and heel counter are made of a material akin to nerf foam. Unlike conventional shoes, there is no fabric covering the foam on the shoe’s exterior. Some users, including iRunFar’s Bryon Powell, have had the hard foam at the top of the Achilles notch slice into the skin covering the Achilles while running sockless. Other runners have experienced similar discomfort while wearing running socks. If needed, the upper portion of the Achilles notch can be cut away. New Balance is aware of the problem and is addressing it in the MT101.

The MT100 also has a minimal tongue consisting of a single layer of the lightweight mesh/fabric combination that makes up much of the shoe. The “sausage like” Sure Laces keep the shoe secure and laces locked tight.

New Balance MT100/WT100 Giveaway

Well, we’ve given away the five pairs of New Balance’s MT100 or WT100. The winners are Jeremy Slatton of Barnhart, MO; Glen D of Shrub Oak, NY; David; Randy Snyder of Bismarck, ND; and Derek of Weybridge, VT.

Call for Comments/Questions
While the contest is as simple as noted above, we’d love some more info from our readers. If you’ve previously worn the MT100 or WT100, please let us know what you like about them? If you’ve worn other minimalist trail running shoes, what do you like such shoes, in general, and what has you the most excited about the New Balance shoes?

As always, please ask any questions you might have about the shoes.

[Note regarding comments: We might delete all non-substantive, contest-entry comments after the contest concludes so as to make the remaining substantive comments more useful to future readers.]

[Disclosure: The Amazon link in this article is part of an affiliate program that helps support iRunFar. If you haven’t guessed, New Balance is providing the five pairs of MT100/WT100s.]

Travis Liles

Travis Liles is a gear reviewer at iRunFar. He’s been reviewing trail running and ultrarunning gear (and occasionally penning an article) for over 15 years. He is married to his Junior High sweetheart, has two amazing daughters, and works as a solution architect for a large software company. Originally from the Midwest but now based in Portland, Oregon, Travis is an avid trail runner and ultrarunner. Over the past 18 years, he has competed in many ultra-distance races and has completed 15 100-mile races, including Ozark Trail, Leadville, Big Horn, and HURT 100. He is a recovering RD and enjoys pacing friends, trail work, and volunteering at local events.


×